Under-Table Wireless Charger for Desks | Up to 30mm Surface
Dedicated through-surface charging system for non-metal desks and counters. Designed for hidden installation below a suitable surface, with the material, thickness, phone position and thermal behaviour validated for each project.
By submitting this form, you agree that CowinLink may use your information to respond to your enquiry. Read our Privacy Policy.
Details about Under-Table Wireless Charger for Desks | Up to 30mm Surface
Hidden wireless charging for desks and counters
This under-table transmitter is installed below a non-metal surface so the charging hardware stays out of view. It is intended for desks, nightstands, hospitality furniture, counters and meeting spaces where a clean surface is important.
This is a dedicated through-surface system. Charging through a thick surface is not the same as placing a standard Qi pad under any desk. Material, thickness, moisture, coil alignment, phone location and heat must be evaluated together.
Reference configuration
| Parameter | Reference value |
|---|---|
| Maximum phone output | Up to 15W, dependent on device, adapter and installation |
| Input | 7.5–12V / 2A maximum |
| Reference surface thickness | Up to 30mm on suitable non-metal materials; sample testing required |
| Module size | 90 × 65 × 20mm |
| Material | ABS + PC enclosure |
| Installation | Adhesive holder or screw retainer, depending on the furniture design |
Installation limits
- Do not install directly behind metal or metal-laminated surfaces.
- Keep the marked charging position aligned with the transmitter coil.
- Confirm the adapter, cable route, ventilation and accessible service method.
- Test every intended surface material and thickness before volume production.
OEM integration
Cable length, input connector, holder, charging-position marker, colour and packaging can be reviewed. Send the furniture material, cross-section, thickness, underside space, target devices, required quantity and market before requesting a sample.
